|Per ship||Estimated requirement for 10 years||Estimated Budgetary cost/system||Field Evaluation Trials||QA Inspection||Internal Certification of OFB/PSUs||Remarks|
|1 Set||10 Set||INR 45 lakhs||Not Applicable||Not Applicable||Not Applicable||Type Approval Certificate|
|MCT Glands each complete with required accessories i.e. end packing/wedge kit, Compression unit, corner block etc. MCT Glands to consist of the following:|
|1||The Transit FrameFrame to be made up of primed or plated mild steel, stainless steel or aluminium, ABS grade A/B, Thickness 10 mm and Inner corner radius 20 mm. The frame shall be carefully welded at the corners and finished to the highest quality. The frame shall be capable to weld or bolt to a metal bulkhead.|
|2||Cable insert modulesShall be made of zero halogen, intumescent elastomeric polymer. Each insert module shall accept a range of cable diameters to enable the complete range of standard sizes to be covered . Top half and bottom half shall correctly match for all sizes.|
|3||The Compression SystemThe Compression System shall consists of end packer and compression plate. End Packer – This is final element for frame installation, inserted above the compression plate and the bolts tightened to seal the whole frame.
Compression Plate – To be placed on the top row of blocks, to distribute the pressure from the compression tool and compression system.
|4||Stay PlatesEach evenly packed row of blocks shall be held by a stay plate made up of stainless steel to assist with assembly, before the next row is packed on top.|